IEC's NEW LEVELERS PHOTOS

IEC manufactures leveling mounts, levelers, leveling pads, furniture glides, leveling feet, leg levelers, swivel levelers, swivel glides, rigid glides, tack glides, vibration mounts, cabinet hardware and custom threaded components.

You are on the NEW PRODUCTS page. To get to IEC's LevelingMounts.com Home Page - Click Here

Billing and Shipping address:

International Equipment Components, Inc.
2201 E. Willow St, #D-104, Signal Hill, CA 90755
Phone: 562-597-4533, Fax: 562-498-2275, glides@verizon.net


Our Motto: Any thread of any length on any base! ®

Click Here for Larger Image of Product Offering

Click Here for Largest Image of Product Offering

e-Catalog (.pdf) Heavy Duty Levelers - Download pages

e-Catalog (.pdf) - 12 pages @ .5 MB - Light & Medium Duty Glides - Download catalog


Click here to request a free IEC Heavy Duty Swivel Leveler catalog... e-mail your shipping address.

Click here if you have an URGENT need for a free IEC Heavy Duty Swivel Leveler catalog.. e-mail your shipping address.


Click here to request a free IEC Light & Medium Duty Leveler catalog... e-mail your shipping address.

Click here if you have an URGENT need for a free IEC Light Duty Leveler catalog.. e-mail your shipping address.


To print pages in our site, click anywhere in lower frame (below menu bar) before printing.

Non-cataloged "stock" levelers as of 6/15/2007 (by thread size and length)

M5 x 5 mm
M6 x 30 mm
M8 x 25 mm, 35 mm, 40 mm, 51 mm, 62 mm
M10 x 35 mm, 40 mm, 60 mm, 65 mm, 102 mm
M12 x 65 mm, 75 mm, 102 mm, 125 mm
M16 x 70 mm, x 90 mm
M20 x 185 mm

1/4-20 x 1/2", x 1", x 1-1/2", x 1-3/4, x 2-1/4", x 3"

5/16-18 x 1/2", x 5/8, x3/4", x 1", x 1-1/2", x 2-1/2", x3", x 4"

3/8-16 x 1", x 1-1/4", x 1-9/16", x 1-3/4", x 2", x 3", x 4" 5"
3/8-24 x 1"

1/2-13 x 1-9/16", x 1-3/4", x 3", x 3-1/2", x 3-3/4", x 4", x 5" x 6"; x 8"
1/2-20 x 2", x 4"

5/8-11 x 1-9/16", x 4", x 5", x 6", x 8"

3/4-10 x 1-9/16", x 2-1/2", x 3", x 3-1/2", x4", x 4-1/2", x 5", x 6", x 9"
3/4-16 x 2", x 4"

1-8 x 2", x 4-1/4"

1 1/4-7 x 3"

NEW PRODUCT PHOTOS


UPCOMING NEW PRODUCTS - June 2007 - .PDF File - Click Here



NEW PRODUCTS (Self Adjusting Levelers) - May 2007 - .PDF File - Click Here



Decorative Knobs & Drawer Pulls - .PDF File - May 2007 - Click Here



Polymer Furniture & Equipment Sliders - Adhesive Backed and Reusable Moving Sliders (.pdf file) - March 2007 - Click Here


NEW PRODUCTS - September 2006 - .PDF File - Click Here




NEW PRODUCTS - August 2006 - .PDF File - Click Here




NEW PRODUCTS - July 2006 - .PDF File - Click Here


* * NEW * * (Patent Pending) - June 2006

e-Catalog (.pdf) : Knob Style Socket Glides - Use your own threaded stud - Click Here


Entire Offering of Caps/Plugs - Click Here - August 2005
All Caps measured by Outside Dimension of Tube / Pipe

CAPS SHOPPING CART - Click Here


Plastic (White and Black) & Nickel Plated Spring Caps/Plugs (.pdf file) - Click Here



O.D. Caps, Angle Iron Caps, Weldcup Caps & Domed Caps - .PDF File - Click Here



Round & Square Black Vinyl Caps (.pdf file) - Click Here



Steel, Aluminum and Stainless Round & Square Stamped Caps - Click Here

Steel, Aluminum and Stainless Weld Caps - Click Here

CAPS SHOPPING CART - Click Here



4/19/05 - 3/8-16 x 5" Leveler. 2-1/4" dia. white nylon base with zinc plated metal shell. P/N: IL11A-65H

3/15/05 - Clear Plastic Floor Protector. Available in 2" dia. (IL-CUP-2) and 1-1/2" dia. (IL-CUP-1-1/2) inside diameter. Also available in brown rubber 1-1/2" dia. (IL-CUP-1-1/2-BR), 1-3/4" (IL-CUP-1-3/4-BR) and 2" square (IL-CUP-2-SQ-BR).

1/10/05 - Poly Based Swivel Levelers. Steel or stainless stud or socket on a black polyamide swivel base. Lag holes available in most base sizes. e-Catalog (.pdf) - Click Here


1/4/05 - Non-cataloged Slant Base Swivel Levelers Shown above are (L to R) IL2-7GX275 (1/2-13 x 2-3/4" gold swivel leveler with 1-7/8" dia. base). Gold zinc or clear zinc plating.
The IL2-7G8 has a 5/8-11 x 2" stud with a 1-7/8" dia. base (instead of the standard 2-1/2" base). The IL2-6G7 has a 1/2-13 x 2" stud on a 1-1/4" dia. base (instead of the standard 1-7/8" base).
To lower costs, you can choose a smaller base diameter for any thread size you require. For example, the 3/4-10 or 1-8 thread size comes standard with a 3" base diameter, but to lower cost you may choose a 2-1/2" or 1-7/8" diameter base and realize significant savings. Call or email for pricing and availabilty on these reduced cost solutions.


11/22/04 - Clear Polyurethane Bumpers - Adhesive Backed. Reduce shock, vibration and sound while protecting surfaces. 1/4" dia. thru 1" dia.
e-Catalog (.pdf) : Adhesive Backed Bumpers - Click Here

POLYURETHANE PADS SHOPPING CART - Click Here



10/15/04 - Felt, Clear Vinyl, Rubber and Cork Pads - Adhesive Backed. Reduce noise and protect surfaces. 3/8" dia. thru 1-1/2" dia.
e-Catalog (.pdf) : Adhesive Backed Pads - Click Here

Felt Pads SHOPPING CART- Click Here



8/20/04 - Black Glides: Shown above is our 3/8-16 black zinc-plated glide with a 1-5/8" dia black plastic base. It is available in 1-1/2" thread length (p/n: IL31-6BX15), a 2-1/2" thread length (p/n: IL31-6BX25), and a 3-1/2" thread length (p/n: IL31-6BX35).


2/14/04 - Fixed Stud and Socket Levelers: Shown above are zinc plated non-swivel levelers designed for extra sturdiness and to eliminate pad separation from the stud. Four lag holes are included in order to bolt the 4" base diameter to the floor. We offer three socket types: 3/4-10 (IL91-9), 5/8-11 (IL91-8) and 1/2-13 (IL91-7). We also offer three stud types: 3/4-10 x 4" (IL92-9X4), 5/8-11 x 4" (IL92-8X4) and 1/2-13 x 4" (IL92-7X4). Also available with other base diameters, thread sizes and finishes. You can also order with an elastomer pad or without the lag holes.


1/26/04 - Top Hex Levelers: Shown above is P/N: IL64-8BX4-BR. It has a 5/8-11 x 4" thread with top-end internal hex (broached hex) on a 1-7/8" dia. black low-profile swivel base. Also available with other base diameters and thread sizes.


1/19/04 - Vinyl, non-skid glides: Shown above-left is P/N: IL9-5HX15-PVC. It has a 5/16-18 x 1-1/2" thread on a 1-3/8" dia. gray vinyl base. The right-hand leveler is P/N: IL12-72H-PVC. It has a 1/2-13 x 2" thread on a 1-11/16" gray vinyl base. To order the 3/8-16 x 1-1/2" size, use P/N: IL9-6HX15-PVC.


1/16/04 - Black base glides: Shown above is P/N: IL9-62HB. It has a 3/8-16 x 2" thread on a 1-3/8" dia. black poly base.


1/15/04 - Metal based swivel glide: Shown above is P/N: IL37-63. It has a 3/8-16 x 3" thread with lower hex on a 1-3/4" dia. metal swivel base. Also available in shorter thread lengths [2-1/2" (IL37-6X25), 2" (IL37-62), 1-1/2" (IL37-6X15)]


1/14/04 - Side/End mount furniture glide: Shown above is P/N: IL55B. It has a 1" adjustable height black 1-1/8" dia. plastic base. Adjustment is done using an allen wrench. The metal flange is 2" wide, 1-1/4" tall, 3/8" thickness to prongs. Distance to hole centers is 1-1/2".


12/10/03 - Round bottom nail glides
IL21-N3-100 (1" dia.); IL21-N4-1/2 (1/2"); IL21-N1B-1/2 (1/2"); IL21-N1B (7/8"); IL21-N1W-1 (1")



12/9/03 - Flat bottom, swivel, rectangular & felt nail glides
IL20F-N1 (7/8"); IL20-N1 (7/8"); IL21-N5 (1-1/8" swivel); IL21-N2W (2" long); IL21-FELT-1 (1")



12/8/03 - Hex type threaded glides
IL40-51 (5/16-18); IL40-62-SL (3/8-16); IL32-51B (5/16-18); IL32-61B (3/8-16); IL32-7BX175 (1/2-13)



12/7/03 - Octagon, hex & low profile black base threaded glides
IL39-4BX15 (1/4-20); IL39-5BX15-SL (5/16-18); IL33-5BX15-SL (5/16-18); IL33B-61B (3/8-16)



12/6/03 - Swivel glides
IL22-R1 (5/8"); IL38-41B (1/4-20); IL38-41W (1/4-20); IL13-5X15 (5/16-18); IL43-64-SL (3/8-16 x 4")



12/5/03 - Vinyl & rubber glides
IL9-62HB-PVC (3/8-16 x 2"); IL9-5HX15-PVC (5/16-18); IL9-6HX15-PVC (3/8-16); IL42-5GX15 (5/15-18); IL42-72B (1/2-13)
Bottom row: IL15-4X1/2 (1/4-20); IL15-41 (1/4-20); IL15-61 (3/8-16)



12/3/03 - Rubber crutch tip feet & caps/plugs
IL-CTG-787B (7/8"); IL-CTG-1W (1"); IL27B-CAP-BK (2x2); IL25-CAP-BK (1x1); IL30-125-NP (1-1/4"); IL30-150-W (1-1/2")
Plastic & Steel Caps (.pdf file) - Click Here


12/2/03 - Threaded inserts for tubing, wood & metal (weld type)
IL24 thru IL29



12/1/03 - Side & Corner brackets
IL30-5-CB (5/16-18); IL30-6-CB (3/8-16); IL30-6-SB (3/8-16)



5/22/03 - Vibration & Shock Mounts: Shown above are shock and vibration mounts for machinery and equipment. Available in 5 different base sizes. P/N's are IL-VM-__(1-5). [1=2" base dia, 2=3", 3=5", 4=6", 5=9"].


5/8/03 - "Stand-off" type hex levelers: Shown above are extended hex levelers with top-end hex also, 3/8-16 with 4" of thread, 1-1/2" of lower hex and 1/4" hex on top of stud. The left-side part (1" dia. black base) is P/N: IL7-6BX6-HX-EX.


5/7/03 - Top end Allen Drives: Shown above are levelers with top end internal hex for an Allen Hex wrench. The left P/N: IL2-8G9X425-BR (3/4-10 thread on 2-1/2" dia. base). The right P/N: IL70-8GFX4-BR-H (5/8-18 x 4" thread on a 4" dia. low profile base with lag holes). Many more sizes available from stock.


3/1/03 - Extended thread lengths and slots: Shown above are knob-style glides with thread lengths up to 2-1/4" long, some available with optional slot (IL84-6BX225-SL). Base diameters from 1-1/2" to 3" (1.2" increments). e-Catalog (.pdf), Medium Duty Leveler Specs - Click Here


2/27/03 - Caps for tubing: Shown above are caps for square and round tubing. The fin style caps fit a range of 12-23 gauge tubing. The Part number for the 2" square cap is IL27B-CAP-BK, 1-1/2" square is IL27-CAP-BK, 1" square is IL25-CAP-BK and 3/4" square is IL24A-CAP-BK.


12/31/02 - Vibration Levelers: Shown above is P/N: IL42-72HB. It has a 1/2-13 x 2" free-turning thread on a 1-1/2" dia. black neoprene base. Also available with non-marring gray rubber base, P/N: IL42-72HG. Alternate thread sizes include 3/8-16 x 3" (IL42-63HB) or 5/16-18 x 1-1/2" (1" black rubber base) (IL42-51HB).


12/20/02 - Top Hex Levelers: Shown above-left is P/N: IL8A-7BX3-HX. It has a 1/2-13 x 3" thread with top-end hex (lower hex also) on a 3" dia. black poly base. Also available with other base diameters. The right-hand leveler is P/N: IL7M-6BX3-HX. It has a 3/8-16 x 3" thread on a 2-1/2" base.


11/5/02 - New Accessories: 3/8-16 corner brackets (IL30-6-CB) and side brackets (IL30-6-SB), 5/16-18 (IL30-5-CB)corner bracket, 1/4-20 thru 1/2-13 t-nuts, and various types of tubing inserts (4-sided or star-clip style).


10/18/02 - Non-swivel clear glide: Shown above is P/N: IL35-41. It has a 1/4-20 x 1" thread on a 1-1/8" dia. clear plastic base. Also availble in 1/2" thread length (IL35-4X1/2) and 3/4" thread length (IL35-4X3/4).


9/28/02 - Hex Based Levelers: Shown above-left is P/N: IL40-5X15-SL. It has a 5/16-18 x 1-1/2" thread with top-end slot on a 3/4" hex base. Also available in 1/2", 1" & 1-1/4" lengths and in 1/4-20, 3/8-16, 1/2-13 & metric thread sizes. Also available with a gray polyethylene pad that is factory-installed over the hex (add -GC to P/N). The right-hand hex leveler is P/N: IL41-5X25. It has a 5/16-18 x 2-1/2" thread on a 1-3/8" hex base. Also available in 1-1/2" lengths and in 1/4-20, 3/8-16 & 1/2-13 x 3" thread sizes. e-Catalog (.pdf) : IL40 - Click Here


9/10/02 - New Product Family: Non-Tilt Low Profile Levelers. Shown above is P/N: IL64-7G-NT. It has a 1/2-13 x 2" stud with a 1-7/8" dia. steel base. The stud is free-rotating yet only tilts 1-2 degrees. The non-tilt design helps prevent base and stud separation. Use the same part numbers as the low-profile family of levelers, but add -NT to the part number.


7/26/02 - Now available: Bases with flats and/or threaded holes and handwheels. Shown above is P/N: IL64FL-4BX15-HW. It has a 1/4-20 x 1-1/2" stud with a 1-7/8" dia. steel base with flats. The aluminum handwheel is 1-7/8" dia. and can be anodized gold, clear, etc.


4/6/02 - Just released: 1/4-20, 5/16-18 and 3/8-16 vinyl based levelers with 1-1/2", 2", 2-1/2", and 3" diameter solid PVC bases for non-skid/vibration applications. Shown above are P/N: IL82-5WX125-PVC and IL82-5BX125-PVC (black). It has a 5/16-18 x 1-3/8" stud with a 1-1/2" dia. white poly-vinyl base. The P/N for the 2", 2-1/2" and 3" dia. versions are IL84-5WX125-PVC and IL86-5WX125-PVC and IL88-5WX125-PVC. To order in black, use a B instead of W in the part number. To order stainless, use a S after B or W. Also available in gray, clear and other colors and materials per your specifications.

.

1/28/02 - Now available: 1/4-20, 5/16-18 and 3/8-16 medium duty levelers/knobs/thumbscrews with 1-1/2", 2", 2-1/2", and 3" diameter solid bottom bases. Shown on the left in left photo above is P/N: IL84-5BX125. It has a 5/16-18 x 1-3/8" clear zinc plated stud with a 2" dia. black poly base, grip ridges on outside diameter, chamfer on bottom edge to ease sliding of heavy furniture. The part number for the front-center leveler is IL7A-6BX2 (3/8-16 x 2" thread with hex, 2" dia. base). The leveler in the right of the photo shows P/N: IL88-5BX125. It has a 5/16-18 x 1-3/8" stud with a 3" dia. black poly base. The P/N for the 1-1/2" and 2-1/2" dia. versions are IL82-5BX125 and IL86-5BX125. The right-hand photo shows the top view of the left photo. The upper-right leveler has a 5" stainless steel thread on a 3" dia. black poly base, P/N: IL88-8BSX5.

.

1/25/02 - Now available: Extended thread length low profile levelers. 1/4-20 up to 1-1/4-7 thread sizes available on 1-1/4" dia. to 4" dia. swivel bases. Right photo shows P/N: IL64-7GX8-FL, 1/2-13 x 8" swivel leveler with low profile wrench flats.


1/22/02 - Now available: 1/4-20 x 1-1/2" and 3" levelers. Shown above is P/N: IL62-4GX15, IL64-4GX3 and IL68-4GX15 (L to R). 1-1/4", 2", 2-1/2" and 3" base diameter options. 10-32 and 5/16-18 threads sizes also available.

.

10/1/01 - Now available: 5/16-18 medium duty leveler with 3" diameter base. Shown above-right is P/N: IL88-5BX125. It has a 5/16-18 x 1-1/4" clear zinc plated stud with a 3" dia. black polyethylene base, grip ridges on outside diameter. The right photo shows all four base diameter options: 1-1/2", 2", 2-1/2" and 3". P/N's: IL82-5BX125, IL84-5BX125, IL86-5BX125 and IL88-5BX125, respectively (L-R). Burgundy, Gray, Forest Green and other diameters also available on request.


7/31/01 - Now in stock: top end internal hex for adjusting from above with a allen wrench or hex drive. Shown above are 1/2-13 x 6" clear zinc plated studs with a 1/4" top-end hex and a 1-7/8" black or white delrin base. P/N: IL4Z-7BX6-BR & IL4Z-7WX6-BR, respectively.


7/27/01 - Now available: 1 1/4-7 low profile levelers. Shown above is P/N: IL70-12GX3-H (1 1/4-7 x 3" threaded stud with 4" dia. base, 5/16" thick, two .56" lag holes). Click on P/N for dimension sheet


6/12/01 - 1/2-13, 3/8-16, 5/16-18 and 1/4-20 levelers are now in stock. Shown above is IL32-6BX15 (3/8-16 x 1-1/2" leveler, 1-1/4" dia. black nylon base with 7/8" hex and bottom phillips slot). The part numbers for the 1/4-20, 5/16-18 & 1/2-13 version are IL32-4BX15, IL32-5BX15 & IL32-7BX15, respectively. 1" dia. and 1" thread length also available.

.

4/24/01 - 1/4-20 x 1" swivel glides and 5/16-18 x 1-1/2" (and 4") glides are now in stock. Shown in left photo above are (L to R) IL38-41B (1/4-20 x 1" swivel leveler, 1-1/4" dia. base,) and IL39-5BX15-SL (5/16-18 x 1-1/2" slotted leveler, 1" black hex base). Shown in right photo above are (L to R) IL36-41 (1/4-20 x 1" leveler, 1-1/8" dia. beige curved base,) and IL36-54-SL (5/16-18 x 4" slotted leveler, 1-1/8" dia. beige flat base).


4/23/01 - 3/8-16 x 1" and 1-1/2" levelers are now in stock. Shown above are (L to R) IL33B-61B (3/8-16 x 1" leveler, 2" dia. poly base, bottom slot) and IL33-6BX15-SL (3/8-16 x 1-1/2" slotted leveler, 1-1/2" dia. poly base). Also available IL33A-6BX15-SL (3/8-16 x 1-1/2" slotted leveler, 1-3/4" dia. black poly base).


4/20/01 - Side and Corner Brackets are now available. Shown above are (L to R) IL44-64-SB (side bracket with 3/8-16 x 4" slotted swivel leveler, 1-1/2" dia. base) and IL44-63-CB (corner bracket/brace with 3/8-16 x 3" slotted swivel leveler, 1-1/2" dia. base). To order just the brackets use P/N's: IL30-6-SB (side bracket) or IL30-6-CB (corner bracket). Many more thread lengths and leveler options are available for these brackets.


4/20/01 - 3/8-16 x 1-1/2", 2-1/2", 3", 3-1/2" and 4" slotted swivel levelers are now in stock. Shown above are (L to R) IL43-64-SL (3/8-16 x 4" slotted swivel leveler, 1-1/2" dia. base) and IL43-63-SL (3/8-16 x 3" slotted swivel leveler, 1-1/2" dia. base). 1-1/2" length = P/N: IL43-6X15-SL, 2-1/2" length = P/N: IL43-6X25-SL.


2/7/01 - Several thread sizes available for the 1-7/8" diameter Black Delrin Swivel Base. Shown above are (L to R) 3/4-10 x 2", 5/8-11 x 2", 1/2-13 x 2-3/4", 1/2-13 x 4" and several other sizes in the back row. Also available with a slip-on non-skid pad (upper right corner of photo). Close-up photo below, dated 9/2/99.


2/2/01 - Increased options available: Threaded inserts. Shown above are various types and sizes of threaded inserts (5/16-18, 3/8-16 & 1/2-13 shown) installed on various leveling feet (1" to 3" dia. bases shown). Weld nuts, propellor nuts and many other tubing inserts also in stock.


1/28/01 - Now available: top end hex for adjusting from above with a socket or wrench. Shown above are two sizes of 3/8-16 levelers on vinyl, delrin and polyethylene bases. (3" length in steel, 1-1/2" length in stainless)


1/19/01 - Now in stock: 3/4-10 x 9" levelers with wrench flats. Shown above is P/N: IL2-9GX9-WF (3/4-10 x 9" stud with 3" dia. swivel base)


1/19/01 - Now available: Extended Hex levelers. Shown above are several 1/2-13 and M12 sizes. The longer hex length eases set-up when installing equipment in the field, especially in low profile applications.


10/10/00 - Now in stock: 1-1/2" Vinyl Based Levelers. Shown above is P/N: IL8V-M16BX70SQ (M16 x 70 mm with square, 1-1/2" dia. black PVC base) and IL7V-7CX3-SLT (1/2-13 x 3" with slot, 1" clear PVC base)


10/10/00 - We now offer Low Profile Swivel Levelers with a 3/4-10 x 5" & 6" stud length. Shown above are (L to R) P/N: IL64-9GX4, IL68-9GX2 & IL66-9GX5.

.

6/29/00 - We now offer Aluminum Based Swivel Levelers. Shown above-left is P/N: IL-AL8-8X25-BLU (5/8-11 x 2-1/2" stud with top hex for 1/4" Allen wrench, 2-1/2" dia. aluminum base, blue anodized) and IL-AL8-8X25-CLR (plain aluminum finish). Shown above-right is P/N: IL-AL8-8X25-BK-JN (5/8-11 x 2-1/2" stud with top hex for 1/4" Allen wrench, jam-nut provided, 2-1/2" dia. aluminum base, black anodized). Also available with a non-skid pad (shown in far-right). Greeen, red, violet and other colors available.


4/22/00 - We now offer Vinyl Based Levelers for anti-skid or torque thumb screw applications, etc. Shown above is P/N: IL7V-6CX2-SLT (3/8-16 x 2" with slot, 1" clear PVC base) and IL7V-4BX2-SLT (1/4-20 x 2" with slot, black PVC base)


4/1/00 - Now available: Wrench Flats and nylon thread-locking patch for low-profile applications. The patch stops the leveler from unthreading during shipping. Shown above is P/N: IL7AF-6BX3P (3/8-16 x 3" with flats and patch, 2" black Delrin base).


2/22/00 - We have expanded our Swivel-type chair and furniture glide offerings. Shown above are P/N's: IL22S-R3 (7/8" tubing), IL23S-S2 (1" square tubing) & IL22X-R625 (5/8" tubing) with nylon bottom.


1/29/00 - Low Profile 1/4-20 octagon based glides are available. Shown above is the IL39-4BX15 (1/4-20 x 1-1/2", 1" base).

1/28/00 - 5/16-18 glides are now stocked. Shown above: IL9-51.5H & IL9-51 (5/16-18 x 1-1/2" with hex, 1-3/8" base & 5/16-18 x 1" w/o hex). Also available, P/N: IL11-61H (3/8-16 x 2-1/2" with hex, 1-3/4" base) & IL12-72H (1/2-13 x 2-1/2" with hex, 1-3/4" base).

1/27/00 - 1-1/4" dia. nickel plated spring caps are available. Shown above is the IL30-125-NP.


1/5/00 - 1/4-20, 5/16-18 and 3/8-16 swivel glides are available. Shown above is IL13-41 (1/4-20 x 1", 1-1/8" base, nickel-plated shell) and P/N: IL13-51X15 (5/16-18 x 1-1/2", 1-1/8" base). Also available in a 5/16-18 x 5/8".


1/4/00 - Black vinyl glides are available. Shown above is IL15-41 (1/4-20 x 1", 1-1/8" base), P/N: IL15-6X1 (3/8-16 x 1", 1-1/8" base), and P/N: IL15-6X15 (3/8-16 x 1-1/2", 1-1/8" base). To order 1/4-20 x 1/2", use P/N: IL15-4X1/2. To order 5/16-18 x 1-1/2" thread size, use P/N: IL15-5X15. To order 3/8-16 x 1" use P/N: IL15-6X1.


1/3/00 - Steel glides with a plastic cushion are available. Shown above is IL16-41 (1/4-20 x 1", 7/8" base), P/N: IL17-51 (5/16-18 x 1", 1-1/8" base), and P/N: IL18-51 (5/16-18 x 1", 1-1/4" base). To order 3/8-16 x 1" thread size, use P/N: IL18-61


1/2/00 - Nail-in glides are available. Shown above is P/N: IL20-NB, (1/2" long nail, 5/8" dia. brown base), P/N: IL20-NW (1/2" long nails, 1-7/8" length x 5/16" thick), P/N: IL20-N2 (3/4" long nail, 1-1/8" plastic base), and P/N: IL19-N3 (3/4" long nail, 1-1/4" steel base).


1/1/00 - Threaded inserts are available. Shown in top row above (L-R) is P/N: IL25-4 (1/4-20 threaded insert for 1" square tubing, 16-18 ga.), P/N: IL25-4-ST (1/4-20 threaded insert with star clip for 1" square tubing, 16-18 ga.), P/N: IL27-R5-ST (5/16-18 threaded insert with star clip for 1-1/2" round tubing, 16-18 ga.), and P/N: IL27A-6-ST (3/8-16 threaded insert with star clip for 2" square tubing, 16-18 ga.). To order for 1-1/4" tubing, use P/N: IL26-??-ST. Shown in bottom row above (L-R) is P/N: IL29-7T (1/2-13 steel tee-nut for wood), IL29-6T (3/8-16 t-nut), IL29-5T, (5/16-18 t-nut), IL29-5P (5/16-18 propellor nut) and IL29-4 (1/4-20 propellor nut). Weld nuts also available (use "W" instead of "T").

12/7/99 - Low Profile hex based levelers with a top slot are available. Shown above is the LF-375-HBSL (3/8-16 x 2"). Also available in 1/2-13 and M12 x 50 mm version.

10/11/99 - Levelers with a 1/4" or 3/8" square are available for top-end adjustment with a socket or open end wrench. Shown above are the IL8-M16BX70SQ (M16 x 70mm stud) and IL8-6Wx175 (3/8-16 x 1-3/4" stud).

10/11/99 - Levelers with Thread Relief are available (to prevent accidental unthreading during equipment set-up). Shown above is an IL2-7GX25TR (1/2-13 x 2-1/2" stud length).

9/2/99 - Solid Base Black Delrin Swivel Levelers with a 1-7/8" diameter base and 1/2-13 stud are available. An anti-skid slip-on pad is also available.

8/12/99 - Low Profile EZ-Slide Levelers with a 2" or 3" diameter black delrin base are available. The standard pad is assembled upside-down to ease sliding over rough surfaces.

6/15/99 - Low Profile Non-Skid Levelers with a 3" diameter black delrin base and "slip-on" elastomer pad. Choose any thread (3/8-16 up to 3/4-10) of any length. Shown above is P/N: IL8A-7BX35NSP (1/2-13 x 3-1/2" stud).
.
10/12/98 - Low Profile Steel Swivel Levelers with even more thread sizes and lengths are available. All components are interchangeable prior to assembly.

2/5/98 (5/7/98) - 1/2-13 Levelers (& 1/2-20x4") are available in 5 stock lengths: 1-9/16", 3", 3-1/2", 4" & 5". Choose from 4 sizes of delrin or polyethylene bases.

1/10/98 - Low Profile M5 Glides designed for stackable electronic components are available in 4 different base diameters - 25 mm, 38 mm, 50 mm & 75 mm.

10/10/97 - Delrin and Polyethylene Levelers with 3/4-10 threads now available in 6 stock lengths: 1-1/2", 2", 2-1/2", 3-1/2", 4-1/2" & 5". 1400 lb load rating.

8/21/97 - Ultra Low Profile Levelers with standard and extended thread lengths are now available. Shown above is the IL68-8Bx6" beside an IL1-9G. This design allows for the casters in your design to be recessed, lowering the center of gravity of your equipment. Height from floor to top of adjusting nut is under 3/4". Low Profile Levelers

5/14/97 - IEC introduces NEW Aluminum Bases in many different colors. These rigid levelers can be built using almost any base design shown in this website. Stud material is steel or stainless.


3/5/97 - Low Profile Delrin based Levelers with a 4" stud length are available with an optional slot in the bottom of the leveler. Speed installation time and reduce ergonomic problems.


9/1/96 - Stud type leveler, 3/4-10 x 9" length, 3" diameter gold iridite base. Stud length exceeds height of most casters.



e-Catalog (html) : Light Duty Glides - Click Here


Pay with VISA/MC/AmEx - Click Here

LEVELER DESIGN TIPS - Click Here

LEVELER PHOTOS SORTED BY FEATURE - Click Here

LEVELER PHOTOS SORTED BY GROUP - Click Here

e-Catalog (.pdf), page 1 : Heavy Duty Swivel Levelers - Click Here

e-Catalog (.pdf), page 2 : Medium Duty Levelers - Click Here

e-Catalog (html) : Light Duty Glides - Click Here

To print pages in our site, click anywhere in lower frame (below menu bar) before printing.

Thanks for visiting IEC. Have a nice day. . . TOP OF SITE . . .Last Update: 6/15/2007

International Equipment Components, Inc.
2201 E. Willow St, #D-104, Signal Hill, CA 90755
Phone: 562-597-4533, Fax: 562-498-2275, glides@verizon.net
www.levelingmounts.com & www.furnitureglides.com
Copyright © 1996-2007